What’s in the Stormwater Pollution Prevention Course?
Our Stormwater Pollution Prevention training course is compliant with EPA standards, and our online version fulfills classroom training requirements. This course contains sections on general knowledge and background regarding governing bodies and regulations; permits that are required and why; Storm Water Pollution Prevention Plans (SWPPPs); best management practices (BMPs), and NOIs and NOTs.
State and local bodies oversee and regulate stormwater discharges from general construction activities through the Federal Construction General Permit (CGP). These discharges define the runoff of any pollutants into waters of the United States from areas where land disturbing activities (clearing, grading or excavation) occur or where construction materials or equipment are located. Complying with the conditions of this permit should lead to stormwater discharges that adhere to Federal water quality standards.
Our training walks you through the CGP. We will also discuss Storm Water Pollution Prevention Plans and the requirements for them. Next, we will learn about best management practices (BMPs), how to properly use and inspect them. Finally, we will cover Notice of Intent and Notice of Termination, when to file them and the requirements for them. This presentation includes intermittent practice quiz questions to prepare for the final written exam included with the course. In addition to the written exam, this course also includes a checklist for employers to use when administering a practical evaluation as required by OSHA.
Estimated Training Length: Because everyone learns and progresses at different speeds, the amount of time you spend taking this training will vary. However, the estimated time for this training is 150 – 180 min.
OSHA Standards: This course meets the following OSHA standards:
- 40 CFR 122.26(a) – Stormwater Discharge
- 40 CFR 122.26 (b)(14)(x) – Construction Considered Industrial Activity
- 40 CFR 122.26(b)(15) – Small Construction Activity
- 40 CFR 123.25(a)(9) – Requirements for Permitting
- 33 U.S.C § 1251 et seq. – Clean Water Act
Why Take Our Online Stormwater Pollution Prevention Training Program (SWPPP Certification)?
Our online training course provides a substantial, thorough, and effective way to learn how to work safely. We’ve been providing industry-specific safety training solutions for individuals, safety managers, and business owners for over 15 years.
The online course meets the classroom requirement for occupational safety training. It also includes a proficiency checklist that employers can use to perform a practical evaluation, in accordance with standards and regulations.
We have fine-tuned this training to provide you with the best experience possible. Our robust training approach gives an interactive experience that helps learners retain information and apply it on the job site, preventing costly accidents and fines. Safety training is an investment. That is why hundreds of companies and individuals all over the world trust the Hard Hat Training Series for their online training needs.
Why Buy Our Online Stormwater Pollution Prevention Training?
- Complete Training: First and foremost our goal is to keep you safe and save you money. Don't risk getting expensive OSHA fines because you settled for a sub-par training program that didn't cover safety topics in depth. Train using a program that helps you retain what is learned so that it is put into practice on job sites.
- Cost-Effective: Hiring a trainer to come on-site can be expensive. In contrast, our online curriculum lowers costs while still providing a professional training experience.
- Records Tracking System: We offer an easy-to-use management system so that if you have multiple students who are receiving the training you can have access to all records, all-terrain certificates, observation guides and more! (contact us if you would like us to quickly create a company account for you)
- Train Your Way: You can use this online training program for new hire training, refresher training or train remotely. Access it from anywhere and work on your schedule.
- Interactive Learning: Special reminders and quiz questions throughout the course prep students for the final exam so that it is passed the first time.
- Corporate License: Do you want to host this course on your own server? Contact us about obtaining broadcasting rights for this and any of our other online courses.
Other Training Options:
We offer two other types of training for this course. The other training types are DIY training kits and a train the trainer certification course. An identical final exam and OSHA-compliant safety training certificate applies, no matter which of the three format options you choose below.
Currently Viewing: Online Training
Our online trainings are great for those who want to learn at their own pace and on their own time. Online trainings can be completed from any location, eliminating the need for expensive seminars.
Employers can assign employees specific trainings and
keep track of their progress and exam scores. We also offer
company accounts, and even
This is the current option
Our kits are the perfect resource for those who want the freedom of training employees themselves. Unlike traditional trainings that are taken once, the kit offers a complete initial training as well as activities and materials to train employees long after they’ve been certified.
These materials include practical evaluations, exams, toolbox trainings, accident profiles, ect.View DIY Training Kit
Train the Trainer
Train-the-trainer courses allow employers to take full control of the training process. Employees who take these courses are fully certified to use the training kit and train others.
This means that employers can hold training seminars and courses without the need for third-party trainers. We will also include a training presentation and materials to train others.View Train the Trainer
Managers: Take complete control of your safety training by requesting your custom branch now! We will respond within one business day. Need it now? Call us at 208-252-5331 for immediate assistance. We are open Monday - Friday, 8am - 4pm MST.
When you purchase (credits) you are essentially buying seats in a virtual classroom. You may assign any employee(s) to any class(es) at any time until those (seats) have all been assigned.
Whether you are looking to save on a few guys or your whole crew, we make it affordable for everyone to get safety training. These discounts are available on all of our online trainings! Look below to see the breakdown of what you can save when you buy your course seats (credits) in bulk with Safety Provisions.
|# of Seats
First time training with us, and have fewer than 25 guys to train? No problem, give us a call and we can get you set up with introductory pricing.
Note: You must call to be approved for the bulk discounts above. (208) 252-5331
Online Safety Training FAQs
What does each online class cover?
Generally speaking, each course covers the following: 1. Overview of the Course/Introduction to the Equipment 2. Anatomy, including pre-shift inspections 3. Stability Principles 4. Common Hazards/Accident Profiles 5. Safe Operation 6. Rigging and Hand Signals (for crane courses only).
How long is the course?
Trainees go at their own pace, but in general each class (including the exam) takes anywhere from 2 to 2.5 hours. We recommend planning for two or more so you don’t end up rushing through the exam.
Are these courses OSHA-compliant?
Yes, all of our Hard Hat Training online courses were built and continue to be updated by our trainers and inspectors using OSHA and ANSI guidelines. But it is important to understand that by OSHA-compliant, we mean it follows to the best of our ability the best practices and safety principles put forth by OSHA. In an online format, it is not possible to cover every code for every situation or hazard across every industry. For this reason, our safety training solutions are tools to further knowledge and help employers train and/or certify their crew. But just because a course or program is OSHA-compliant it does not necessarily mean a company as a whole will be compliant or avoid citation if OSHA were to audit them. There is so much more that goes into collective company compliance with OSHA. For example, workers need to be observed applying in the field what they learned in the classroom. This observation/practical exam should be done by trainers, supervisors, or other designated competent persons. Whether you use our training kits or online courses, we provide guides to help employers do this. Other things that need to be done for ultimate compliance may include but are not limited to: addressing with your crew any gaps in the training or additional hazards or principles specific to your work situation; creating, training on, and enforcing and abiding by written safety programs (also known as plans or procedures); and performing regular inspections and risk assessments.
Are the e-learning classes up-to-date with OSHA standards?
Yes, all of our Hard Hat Training online courses are up-to-date with the latest OSHA standards. As standards change, we make changes to the courses. If you purchase any of our online courses outright, though, it will then be your responsibility to update the course in accordance with any changes to the standard.
Does this course certify or qualify me?
There is a lot of confusion among operators and even companies about what it means to be certified or qualified. Simply put, no, a course does not certify anyone, only an employer does. Or, in other words, because it is the employer’s responsibility to make sure an employee is properly trained, it is also his or her responsibility to say when the employee is “certified,” “qualified,” or “competent.” The online courses, like our training kits on CD or USB Drive or even live training via a 3rd party, is just a tool to help them in doing so.
According to OSHA, all operators of heavy equipment must receive operator training. Proper training must include a classroom portion including a written exam, as well as a practical hands-on portion/exam wherein the operator is observed operating the machine. The online course satisfies the required classroom portion of the training. Upon completion of the course and written exam, the safety administrator of the company will receive a checklist which can be used to observe the trainee on the machine. When done successfully, the administrator signs the bottom of the form. At this point, unless further training is required by your employer, you have done everything required by OSHA to be considered by your employer as “certified,” “qualified,” or “competent.”
If I pass this class and exam can I take my certification and get a job anywhere?
See “Does this course certify me?” This will depend on your employer. Remember, it is their responsibility to see that you are trained and if there is ever an accident, it is they who will have to prove to OSHA that they trained you sufficiently. Because of this, while some smaller businesses may simply accept your certificate and a copy of your test, more often than not they will require you to go through their own training program. This is their right to do so. It is their further responsibility to train you in accordance with the job, site, equipment, etc. Having said that, we have fielded many calls from potential employers who wanted to learn more about the classroom portion of the training we offered. After hearing our explanation, they accepted the online class as satisfying the classroom portion of the required training and proceeded to do their own practical.
How long is the training good for?
OSHA standards dictate that safety certification needs to be completed at least once every three years. Since no online course can provide “certification,” these courses will combine with your onsite practical training to fulfill OSHA’s requirements for up to three years. Having said that, refresher training is required sooner if an employee changes sites or jobs, is asked to operate a different type of the equipment, is involved in a near-miss or accident, or is observed operating the machine in a dangerous manner.
Will I get a certificate?
Yes, upon successful completion of the course and exam, you will have immediate electronic access to your test, a certificate, and a checklist you can use for the practical hands-on portion of the training. Simply print them off.
How many people can use this course? Can I play it for several employees at the same time?
When a course is assigned to an employee, only that employee can take the course. There are many reasons for this, but most importantly the course is designed to train that one employee per OSHA regulations. Also, there is a final written exam at the end that will be linked to the trainee assigned. OSHA requires proof of training and if multiple people were to sit in on that one course, they would not get credit for taking it.
Can I customize the classes?
Your business’s learning portal can be completely customized for your employees including colors and logo. Additionally, if you purchase our courses outright to be used on your own company LMS (learning management system), you also get the right to rebuild them and customize them to meet your own needs. If you have Adobe Captivate, which we use to build our courses, customization is even easier.
Are SCORM/Tin Can options available for use on our own company LMS?
All of our online courses are designed to be SCORM-compatible and can be easily uploaded to your company’s current SCORM-friendly LMS. You can license their use annually or purchase them outright. Licensing or purchasing them outright does not, however, give you the right to resell or distribute our courses to parties other than those whom you are training.
If we buy or license the eLearning courses for use on our own LMS, can you customize them for us?
Yes, we have done and continue to do this for clients. Pricing depends on the extent of customization requested. Please contact us for a quote.
Can I resell these trainings?
We do have resale options available. Contact us regarding resale opportunities.
How do I Look Up My OSHA Compliance Safety Certification?
So, you have already purchased a course from us, taken the online training, and passed the certifaction exam with flying colors. Now what? Most people want to print off a copy of thier OSHA Compliance Safety Certification and keep it for your records. Learn how to do that.
Waylon C. –
Information is up front and relatively easy to understand
Hard Hat Training (verified owner) –
Thank you so much Waylon! We try to keep our trainings informative as well as interactive. We are glad to know that you have found this to be the case. Thank you again!