All Terrain Crane Training Online

(3 customer reviews)


All-Terrain Crane Training Online, designed by trainers with 15+ years of onsite training experience. The estimated time for this training is 150 – 180 min.

  • OSHA-Authorized: OSHA-authorized courses that are reviewed yearly & updated to meet the latest standards.
  • Instant Access: After purchasing, you'll have immediate access to the online course.
  • Printable Certificates: Upon completion, you will receive a printable certificate and OSHA wallet card.
  • For Businesses: We offer company accounts and bulk discounts.


What’s in the All-Terrain Crane Course?

Our All Terrain Crane safety training course is OSHA Aligned, and our online version fulfills OSHA’s classroom training requirement. Each class contains sections on anatomy and components, stability principles, rigging considerations, safe operations, common hazards, and more. In this training, we look at the anatomy and functions of all terrain cranes in general, focusing on components examined during pre-shift inspections. We also discuss crane operation and stability principles, addressing why you should know your truck’s capabilities and work within those limits. We will also teach you about load charts and how to properly utilize them.

The course also covers the safety considerations for operating a crane, including proper setup and rigging principles. It also reviews some of the common crane hand signals that can help you ensure good communication on the job site. Finally, it covers the more common hazards involving all terrain cranes, as well as how to recognize, avoid, or minimize them. We will also present a few case studies to help illustrate these points.

This presentation includes intermittent practice quiz questions to prepare for the final written exam included with the course. In addition to the written exam, this course also includes a checklist for employers to use when administering a practical exam as required by regulations.

Estimated Time: Because everyone learns and progresses at different speeds, the amount of time you spend taking this training will vary. However, the estimated time for this training is 150 – 180 min

OSHA Requirements: This course meets the following OSHA Requirements:

  • 29 CFR 1926.180 – Crawler, Locomotive, and Truck Cranes
  • 29 CFR 1926.1400 – Cranes and Derricks
  • ASME B30.5 – Mobile and Locomotive Cranes
  • ASME B30.22 – Articulating Boom Cranes



Why Take Our All Terrain Crane Training Online?

Our online training course provides a substantial, thorough, and effective way to learn how to work safely. We’ve been providing industry-specific safety training solutions for individuals, safety managers, and business owners for over 15 years.

The online course meets the classroom requirement for occupational safety training. It also includes a proficiency checklist that employers can use to perform a practical evaluation, in accordance with standards and regulations.

We have fine-tuned this training to provide you with the best experience possible. Our robust training approach gives an interactive experience that helps learners retain information and apply it on the job site, preventing costly accidents and fines. Safety training is an investment. That is why hundreds of companies and individuals all over the world trust the Hard Hat Training Series for their online training needs.

Why Buy Our All Terrain Crane Training?

  • Complete Training: First and foremost our goal is to keep you safe and save you money. Don't risk getting expensive OSHA fines because you settled for a sub-par training program that didn't cover safety topics in depth. Train using a program that helps you retain what is learned so that it is put into practice on job sites.
  • Cost-Effective: Hiring a trainer to come on-site can be expensive. In contrast, our online curriculum lowers costs while still providing a professional training experience.
  • Records Tracking System: We offer an easy-to-use management system so that if you have multiple students who are receiving the training you can have access to all records, all-terrain certificates, observation guides and more! (contact us if you would like us to quickly create a company account for you)
  • Train Your Way: You can use this online training program for new hire training, refresher training or train remotely. Access it from anywhere and work on your schedule.
  • Interactive Learning: Special reminders and quiz questions throughout the course prep students for the final exam so that it is passed the first time.
  • Corporate License: Do you want to host this course on your own server? Contact us about obtaining broadcasting rights for this and any of our other online courses.



All Terrain Crane Training | Safety Course

Cranes are used on almost all construction sites, so knowing how to operate safely is vital. All terrain cranes are in high demand as lifting equipment, particularly due to their versatility. All terrain cranes combine the dependability and strength of hydraulic truck cranes with the increased mobility of rough terrain cranes.

What Is an All Terrain Crane?

Working on any construction site requires you to be adaptable to ever-changing circumstances. The equipment you use is no different. All terrain cranes are excellent for jobsites in locations with constantly changing weather conditions. As the name implies, all terrain cranes are designed specifically to handle all kinds of terrain with ease. Compared to other options, these lifting devices are more mobile and move at a faster rate.

All terrain cranes are powerful machines that combine the strength and dependability of standard hydraulic truck cranes with the improved mobility of rough terrain cranes. Both of those choices are acceptable, but an all-terrain hoist could complete the task more quickly. Using an all terrain crane has a number of major benefits, including:

  • Suspension with an all-wheel system
  • Navigation through sand and gravel
  • Smooth performance on asphalt roads and freeways
  • Ability to travel from site to site
  • Large lifting capability
  • Reach speeds up to 55 miles per hour
  • Compact design
  • Integrated boom
  • Mobile undercarriage for greater flexibility
  • Various designs and attachments
  • Durability
  • More visibility for operators

All Terrain Crane Training

OSHA requires that crane operators receive standard-specific training for all the equipment they will use. OSHA also extends training to crane adjacent workers such as signal personnel, competent and qualified persons, maintenance and repair workers, and employees who work close to the equipment. OSHA specifies that crane operators be observed operating the machine in addition to classroom training and a written exam before they can be considered certified.

First, crane operators must be trained on the crane brand and attachments they will be utilizing as well as how they work. Because the controls and handling might vary greatly between machines, operators may need additional training.

The key to a safe crane operation is for employers to organize and hold daily safety meetings to explain the job, methods, and duties, plan for any dangers, and address any necessary changes. Operators must read and understand the company’s safety policies and manuals, perform a full pre-shift examination of the machine at the start of each day or work shift, and never operate a crane that requires care or repair.

OSHA requires pre-operational tests and training for safe operations. Operators can avoid injuries by properly mounting and dismounting a machine, and all controls should be in good working order. Knowing the radius of the pick and the positioning of the load is critical for operators, as it prevents overload tipovers. Operators should stop operations and seek assistance if they are unsure.

Benefits of All Terrain Cranes

Cranes of all shapes and sizes are accessible for use in construction projects. Depending on the building project, you can choose between many different kinds of cranes including tower, railroad, floating, and harbor cranes. For instance, an all terrain crane might be the best choice if your worksite needs something portable and adaptable that can still perform heavy lifting.

Mobility – Mobility is one of the most significant benefits of an all terrain crane. Their movement makes it simple to use them on any surface, including sand, gravel, asphalt, or soil. An all terrain crane can complete the task regardless of the landscape of your site. The crane’s mobility makes it ideal for easily moving around job locations.

Lifting Capacity – The all terrain crane can raise anywhere from 60 to 450 tons to different heights. Because of their capabilities, these cranes are a better option on crowded or congested construction sites.

Versatility – All terrain cranes offer a lot of versatility as well. During lifting operations, their extendable booms enable complete reachability.

Sustainability – All terrain cranes with conventional engines use modern engines that meet EPA emission standards. This lowers energy use and running expenses. Modern engines and hydraulic pumps also lower idle gasoline usage. External power supplies can provide extra energy without the use of gasoline.

Crane Operator

All terrain cranes are adaptable lifting machines due to their versatility. They have a distinct advantage in the construction industry because they can operate both on and off-road. All terrain cranes are excellent for worksites without access to a road. They are an asset to inner-city building sites, as they can move materials between nearby jobsites.

Most worksites are a good fit for all terrain cranes. They work well for managing both large volumes and building activities. They have a variety of applications, including:

  • Wind turbine construction
  • Pipeline installation
  • Lifting precast concrete building sections
  • Steel construction
  • Lifting bricks and other construction materials
  • Cell phone tower construction or upgrades
  • HVAC services

All terrain cranes are capable of withstanding inclement weather. They can be used in conditions ranging from -13° to 104° Fahrenheit. However, cranes and powerful winds don’t mix well. To avoid accidents, you should halt activities when there is strong wind. For information on acceptable wind velocities, operators should consult the operator’s manual.

Is an All Terrain Crane the Same as a Rough Terrain Crane?

All terrain and rough terrain cranes have some similarities, but they cannot be used interchangeably. Rough terrain cranes have fewer tires and higher ground clearance, allowing them to travel on, as the name implies, rougher or rugged landscapes without the use of specialized equipment. They have a longer wheelbase and tires for increased stability, as well as incorporated power steering. However, they are not suitable for regular roads.

Rough terrain cranes are also larger than all terrain cranes. They have larger cabins, which make the user more comfortable while on the job. Their two engines make them a little heavier, which gives them more stability when conducting a lift.

All terrain cranes are more versatile. They are frequently outfitted with an additional set of wheels to improve mobility on the jobsite. For all-wheel drive and all-wheel steer, they can have three to nine axles. When we say all-terrain, we mean it. These cranes are maneuverable on highways and other roadways.

What Does OSHA Say About Crane Training?

In today’s manufacturing and construction industries, moving large, heavy loads are a big part of the job. To keep employees safe, OSHA has mandated specific training and worker precautions. Significant safety concerns must be addressed, both for the crane operators and for personnel near them.

Employers who use cranes and derricks in buildings must follow specific OSHA Requirements. Furthermore, employers on construction sites where cranes are used are liable for violations that expose their employees to hazards, and as a result, they must be aware of the standard requirements that may impact their employees.

For example, OSHA has clear regulations regarding crane operations that occur near power lines. Employers must train each operator and crew member to prevent injury and electrocution. This includes instruction on how power lines pose dangers to those touching the crane itself as well as those in the near vicinity of the crane.

Why Safety Matters

All terrain cranes are used to lift and move materials for a variety of purposes in the manufacturing and building sectors. These systems enable safer, more effective operations when they are correctly installed and used. Poor installation and use, on the other hand, can lead to catastrophic loss of life or limb. Through proper safety training, operators and workers alike can learn to recognize hazards and how to prevent them.

An Excessive Load

According to OSHA, exceeding the crane’s rated capability is to blame for 80% of all accidents and failures involving cranes. Overloading the crane can seriously harm it, compromise its structural stability, and result in total failure. When this happens, falling or failing parts put surrounding workers and crane operators in danger. There are several factors that contribute to overloading:

  • Managing cargo that is heavier than the crane can support
  • Loads being swung, dragged, or unexpectedly dropped
  • Boom side-loading (Whenever the center of gravity of the load is not exactly beneath the crane.)

It is necessary for crane operators to receive thorough training to comprehend these major causes of overloading and how to prevent them. Typically, training programs will cover the fundamentals of load handling and lifting capacities for various situations and operating conditions.

Falling Materials

Falling materials on a jobsite can result in serious injuries or deaths. Some of the situations that can cause material to fall includes:

  • Visual impairment
  • Improper or insufficient material arrangement
  • Mechanical failure
  • Operator error

The first line of defense is hiring knowledgeable and well-trained crane operators. That way, most, if not all, of the causes of falling items can be avoided.

Inadequate Maintenance and Inspection

Load-bearing machinery is subjected to wear and tear during use, which can compromise efficiency. Ropes, wires, and other structural elements that are worn out or otherwise damaged are examples of this harm. It is crucial to regularly inspect these systems to make sure they are in working order to prevent injuries and deaths.

According to the Crane Manufacturers Association of America (CMAA), crane inspectors need the following expertise:

  • 2,000 hours or more of expertise in testing, repairing, and maintaining cranes and hoist equipment
  • Understanding of federal, state, and municipal codes, safety standards, and best practices
  • Knowledge of proper reporting and recording procedures

Four different inspection categories are as follows:

  • Initial Inspections – According to OSHA, every new and modified crane must undergo an initial examination.
  • Pre-shift Inspections – Every time there is a change in the crane operating crew, such as when a new shift begins, conduct a pre-shift inspection.
  • Regular Inspections -These are only performed by certified examiners. The style, size, and capacity of the crane determine how frequently these inspections are conducted.
  • Periodic Inspections – These encompass every component of the crane and involve thorough visual inspections as well as operational checks.

What We Offer in Our Courses

Few things are more terrifying to a crane operator than when a crane becomes imbalanced while lifting a load or when the crane collapses beneath the weight of an excessive load. Our all terrain crane training course offers an in-depth look at the ins and outs of safe crane operation. We go over safe practices and procedures to avoid injuries and even deaths. Our training allows your team to work smarter and safer.

Other Training Options:

We offer two other types of training for this course. The other training types are DIY training kits and a train the trainer certification course. An identical final exam and OSHA-aligned safety training certificate applies, no matter which of the three format options you choose below.

online safety training

Currently Viewing: Online Training

Our online trainings are great for those who want to learn at their own pace and on their own time. Online trainings can be completed from any location, eliminating the need for expensive seminars.

Employers can assign employees specific trainings and keep track of their progress and exam scores. We also offer group trainings, company accounts, and even bulk discounts for businesses.

This is the current option

train the trainer safety training

Training Kit

Our kits are the perfect resource for those who want the freedom of training employees themselves. Unlike traditional trainings that are taken once, the kit offers a complete initial training as well as activities and materials to train employees long after they’ve been certified.

These materials include practical evaluations, exams, toolbox trainings, accident profiles, ect.

View DIY Training Kit
train the trainer safety training

Train the Trainer

Train-the-trainer courses allow employers to take full control of the training process. Employees who take these courses are fully certified to use the training kit and train others.

This means that employers can hold training seminars and courses without the need for third-party trainers. We will also include a training presentation and materials to train others.

View Train the Trainer

Get Your Custom Branch Today!

Managers: Take complete control of your safety training by requesting your custom branch now! We will respond within one business day. Need it now? Call us at 1-888-438-8477 for immediate assistance. We are open o Monday through Friday, 8 AM (CST) to 8 PM (CST).

Autofill may conflict with our security settings which will result in your request not going through.
If you do not see a success message upon sending your request please call us at: (888) 438-8477.

Save Big By Buying Course Seats (Credits) In Bulk!

When you purchase (credits) you are essentially buying seats in a virtual classroom. You may assign any employee(s) to any class(es) at any time until those (seats) have all been assigned.

Whether you are looking to save on a few guys or your whole crew, we make it affordable for everyone to get safety training. These discounts are available on all of our online trainings! Look below to see the breakdown of what you can save when you buy your course seats (credits) in bulk with Safety Provisions.

Online Safety Training FAQs

What does each online class cover?

Generally speaking, each course covers the following: 1. Overview of the Course/Introduction to the Equipment 2. Anatomy, including pre-shift inspections 3. Stability Principles 4. Common Hazards/Accident Profiles 5. Safe Operation 6. Rigging and Hand Signals (for crane courses only).

How long is the course?

Trainees go at their own pace, but in general each class (including the exam) takes anywhere from 2 to 2.5 hours. We recommend planning for two or more so you don’t end up rushing through the exam.

Are these courses OSHA-aligned?

All of our Hard Hat Training online courses were built and continue to be updated by our trainers and inspectors using OSHA and ANSI guidelines. But it is important to understand that by OSHA-aligned, we mean it follows to the best of our ability the best practices and safety principles put forth by OSHA. In an online format, it is not possible to cover every code for every situation or hazard across every industry. For this reason, our safety training solutions are tools to further knowledge and help employers train and/or certify their crew. But just because a course or program is OSHA-aligned it does not necessarily mean a company as a whole will be aligned or avoid citation if OSHA were to audit them. There is so much more that goes into collective company alignment with OSHA. For example, workers need to be observed applying in the field what they learned in the classroom. This observation/practical exam should be done by trainers, supervisors, or other designated competent persons. Whether you use our training kits or online courses, we provide guides to help employers do this. Other things that need to be done for ultimate alignment may include but are not limited to: addressing with your crew any gaps in the training or additional hazards or principles specific to your work situation; creating, training on, and enforcing and abiding by written safety programs (also known as plans or procedures); and performing regular inspections and risk assessments.

Are the e-learning classes up-to-date with OSHA standards?

Yes, all of our Hard Hat Training online courses are up-to-date with the latest OSHA standards. As standards change, we make changes to the courses. If you purchase any of our online courses outright, though, it will then be your responsibility to update the course in accordance with any changes to the standard.

Does this course certify or qualify me?

There is a lot of confusion among operators and even companies about what it means to be certified or qualified. Simply put, no, a course does not certify anyone, only an employer does. Or, in other words, because it is the employer’s responsibility to make sure an employee is properly trained, it is also his or her responsibility to say when the employee is “certified,” “qualified,” or “competent.” The online courses, like our training kits on CD or USB Drive or even live training via a 3rd party, is just a tool to help them in doing so.

According to OSHA, all operators of heavy equipment must receive operator training. Proper training must include a classroom portion including a written exam, as well as a practical hands-on portion/exam wherein the operator is observed operating the machine. The online course satisfies the required classroom portion of the training. Upon completion of the course and written exam, the safety administrator of the company will receive a checklist which can be used to observe the trainee on the machine. When done successfully, the administrator signs the bottom of the form. At this point, unless further training is required by your employer, you have done everything required by OSHA to be considered by your employer as “certified,” “qualified,” or “competent.”

If I pass this class and exam can I take my certification and get a job anywhere?

See “Does this course certify me?” This will depend on your employer. Remember, it is their responsibility to see that you are trained and if there is ever an accident, it is they who will have to prove to OSHA that they trained you sufficiently. Because of this, while some smaller businesses may simply accept your certificate and a copy of your test, more often than not they will require you to go through their own training program. This is their right to do so. It is their further responsibility to train you in accordance with the job, site, equipment, etc. Having said that, we have fielded many calls from potential employers who wanted to learn more about the classroom portion of the training we offered. After hearing our explanation, they accepted the online class as satisfying the classroom portion of the required training and proceeded to do their own practical.

How long is the training good for?

OSHA standards dictate that safety certification needs to be completed at least once every three years. Since no online course can provide “certification,” these courses will combine with your onsite practical training to fulfill OSHA’s requirements for up to three years. Having said that, refresher training is required sooner if an employee changes sites or jobs, is asked to operate a different type of the equipment, is involved in a near-miss or accident, or is observed operating the machine in a dangerous manner.

Will I get a certificate?

Yes, upon successful completion of the course and exam, you will have immediate electronic access to your test, a certificate, and a checklist you can use for the practical hands-on portion of the training. Simply print them off.

How many people can use this course? Can I play it for several employees at the same time?

When a course is assigned to an employee, only that employee can take the course. There are many reasons for this, but most importantly the course is designed to train that one employee per OSHA regulations. Also, there is a final written exam at the end that will be linked to the trainee assigned. OSHA requires proof of training and if multiple people were to sit in on that one course, they would not get credit for taking it.

Can I customize the classes?

Your business’s learning portal can be completely customized for your employees including colors and logo. Additionally, if you purchase our courses outright to be used on your own company LMS (learning management system), you also get the right to rebuild them and customize them to meet your own needs. If you have Adobe Captivate, which we use to build our courses, customization is even easier.

Are SCORM/Tin Can options available for use on our own company LMS?

All of our online courses are designed to be SCORM-compatible and can be easily uploaded to your company’s current SCORM-friendly LMS. You can license their use annually or purchase them outright. Licensing or purchasing them outright does not, however, give you the right to resell or distribute our courses to parties other than those whom you are training.

If we buy or license the eLearning courses for use on our own LMS, can you customize them for us?

Yes, we have done and continue to do this for clients. Pricing depends on the extent of customization requested. Please contact us for a quote.

Can I resell these trainings?

We do have resale options available. Contact us regarding resale opportunities.

How do I Look Up My OSHA Alignment Safety Certification?

So, you have already purchased a course from us, taken the online training, and passed the certifaction exam with flying colors. Now what? Most people want to print off a copy of thier OSHA Alignment Safety Certification and keep it for your records. Learn how to do that.

3 reviews for All Terrain Crane Training Online

  1. Jack M.

    nothing the experience was overall pretty good

    • Hard Hat Training

      Thank you so much, Jack. We appreciate your wonderful review, and we’re glad that it went so well for you.

  2. Matthew Y.


  3. KC

    Easy access and content to follow.

    • Hard Hat Training (verified owner)

      Hi KC, we’re happy that the course was easy to access and follow for you. Thanks for choosing Hard Hat Training!

Add a review

Your email address will not be published. Required fields are marked *

More Information

train the trainer lifetime certifcation

Bulk Discounts

Bulk discounts are avalible when you order nultiple courses or credits. Please call (888)438-8477 for price approval.

Call (888)438-8477
online safety training

Print Details

Want to print training course information and show it to others? See our informational, printable PDF document and print ourself a copy.

View Document
demo out train the trainer certifcation

Demo Course

If further information is needed, companies can request to demo the training course. Call (888)438-8477 to request this service.

View Outline

How Does Online Training Work?

Each employee or individual takes the online course at their own pace. Quiz questions are included along the way to prepare for the final exam (Employers or managers may assign employees to specific safety courses). Quiz questions are included along the way to prepare for the final exam.

Instant access to your safety certification and wallet card is granted when the online course is completed and the subsequent online exam is passed. Once the online exam is passed, administer the practical exam. We suggest correcting any mistakes and having the trainee initial the edit on the practical exam sheet. Congratulations! You have finished your online safety training course.


You may also like…