Description
Machine Guarding Training – Spanish & English
This training course is OSHA-aligned and covers OSHA’s classroom training requirements. Each class contains sections on equipment and anatomy, maintenance and inspections, safe operations and stability, common hazards, and more. This presentation includes intermittent practice quiz questions to prepare for the final written exam included with the course. Upon successful completion of the course and exam, you will have immediate online access to your certificate of completion. You have the option to download the practical evaluations for the specific course. Although the practical evaluation is not a required part of the online course, we strongly recommend completing it under the supervision of your employer to ensure your mastery of the safety training topics.
Estimated Training Length: Because everyone learns and progresses at different speeds, the amount of time you spend taking this training will vary. However, the estimated time for this training is 60 – 90 min.
Intended Audience:
This course covers the following OSHA standards:
- 1910 Subpart O – Machinery and Machine Guarding
- 1910.212 – General Requirements for all Machines
- 1910 Subpart P – Hand and Portable Powered Tools and Other Hand-Held Equipment
- 1917 Subpart G – Marine Terminals
- 1918 Subpart I – Longshoring
- 1926 Subpart I – Construction Industry
- 1928 Subpart D – Agriculture Industry
- 29 CFR 1910.212(a)(3)(ii)
What’s in the Machine Guarding Course?
Looking for a cost-effective and convenient way to offer machine guarding training in Spanish for your employees or customers? Our machine guarding training kit?(available on CD, USB Drive, or via Instant Download) provides simple instructions with all the tools necessary to train and certify your machine guarding operators for OSHA-alignment.
Years of knowledge and experience have gone into creating this training program in Spanish. We’ve done all the research and design, so you don’t have to. This robust training kit makes it easier for you to train your workforce again and again. Check out a sample of the training presentation by clicking on the tab above.
Not quite what you need? We also offer an online machine guarding course as well as corporate broadcast license so that you can make the training materials available on your network to branches across the country.
What’s in the Machine Guarding Training Kit?
- PowerPoint Presentation — you have complete customizability; even down to changing out the logo to your own.
- Instructor notes — our informative instructor notes give guidelines and talking points so that you sound like a pro.
- Student Manual — the student manual is a comprehensive tool you can use during training or give to your operators to refer back to.
- Written Test / Answer Key — print as many copies as you need to certify an unlimited number of students.
- Practical Evaluation Forms — our machine guarding training practical evaluation guide walks you through each requirement, making sure you follow OSHA’s regulations.
- Certificate of completion template — we provide customizable machine guarding safety certificate templates that you can store for your records.
- Wallet card template — some work sites require operators to carry a card; print as many machine guarding licenses as you need.
- Refresher training forms — when it comes time to re-certify workers you will be ready to hold machine guarding refresher certification courses.
- Printable safety posters — fun and informative safety posters that you can print. Our posters promote safety and are visually appealing.
- OSHA Requirements & regulations — complete citations of OSHA Requirements for machine guarding.
- Accident examples & explanations — we teach by example. Real world accident profiles help drive home important safety topics.
- Video News Clips — real life news clips show the reality of machine guarding related issues.
- Much More!
Still have questions?
Visit our Safety Training Kit FAQs page.
Why you need machine guarding training:
While a license is not required in the U.S., certification is. Our training and the included exam will get you certified today.
Other Training Options:
We offer two other types of training for this course. The other training types are online training and a train the trainer certification course. An identical final exam and OSHA-aligned safety training certificate applies, no matter which of the three format options you choose below.
Online Training
Our online trainings are great for those who want to learn at their own pace and on their own time. Online trainings can be completed from any location, eliminating the need for expensive seminars.
Employers can assign employees specific trainings and
keep track of their progress and exam scores. We also offer
group trainings,
company accounts, and even
bulk discounts
for businesses.
View Online Training
Currently Viewing: Training Kit
Our kits are the perfect resource for those who want the freedom of training employees themselves. Unlike traditional trainings that are taken once, the kit offers a complete initial training as well as activities and materials to train employees long after they’ve been certified.
These materials include practical evaluations, exams, toolbox trainings, accident profiles, ect.
This is the current option
Train the Trainer
Train-the-trainer courses allow employers to take full control of the training process. Employees who take these courses are fully certified to use the training kit and train others.
This means that employers can hold training seminars and courses without the need for third-party trainers. We will also include a training presentation and materials to train others.
View Train the Trainer
Our training kit materials provide everything needed to deliver effective safety training. After years of refinement, we’ve ensured they cover the latest requirements, regulations, and hazards associated with operating equipment.
Our courses are reviewed and updated annually to align with applicable OSHA, EEOC, HHS, STC, MSHA, and other standards. To see which standards are addressed in this course, visit the course description tab where all applicable standards are listed.
Train the Trainer courses equip employees to train others. The TTT kits include all the necessary materials – presentations, exams, assessments, toolbox talks, and more – for conducting training. These kits allow you to adjust the training to suit your worksite requirements. The materials can be prepared and ready for use in minutes.
Online Safety Training FAQs
What does each online class cover?
Generally speaking, each course covers an overview of the topic, detailed explanation of relevant equipment, safe operating practices, common hazards to avoid, and hazard control measures.
How long is the course?
Trainees go at their own pace, but in general each class (including the exam) takes anywhere from 2 to 2.5 hours. We recommend planning for two or more so you don’t end up rushing through the exam.
Are these courses OSHA-aligned?
All Hard Hat Training online courses were designed to adhere to OSHA and ANSI training requirements. But it is important to understand that by OSHA-aligned, we mean it follows best practices and safety principles put forth by OSHA. In an online format, it is not possible to cover every code for every situation or hazard across every industry. For this reason, our safety training solutions are tools to further knowledge and help employers train and/or certify their crew.
However, just because a course or program is OSHA-aligned does not necessarily mean a company will be aligned or avoid citations if OSHA were to audit them. There is much more that goes into collective company alignment with OSHA. For example, workers need to be observed applying what they learned in the classroom in the field. This observation/practical exam should be done by trainers, supervisors, or other designated competent persons. Whether you use our training kits or online courses, we provide guides to help employers do this.
Other steps for ultimate alignment may include but are not limited to addressing with your crew any gaps in the training or additional hazards specific to your work situation; creating, training on, and enforcing written safety programs (also known as plans or procedures); and performing regular inspections and risk assessments.
Are the e-learning classes up-to-date with OSHA standards?
Yes, Hard Hat Training online courses incorporate the latest OSHA standards. As standards change, we make changes to the courses.
Does this course certify or qualify me?
There is a lot of confusion among operators and even companies about what it means to be certified or qualified. Simply put, no, a course does not certify anyone. It is the employer’s responsibility to make sure an employee is properly trained, and it is also his or her responsibility to say when the employee is “qualified” or “competent.” Our online courses and training kits are just a tool to help them in doing so.
According to OSHA, proper training must include a classroom portion, including a written exam, as well as a practical hands-on portion/exam wherein the operator is observed operating the machine. Our courses provide the classroom portion of the training. The safety administrator of the company will have access to a checklist which can be used to observe the trainee on the machine. When done successfully, the administrator signs the bottom of the form. At this point, unless further training is required by your employer, you have done everything required by OSHA to be considered by your employer as “qualified” or “competent.”
If I pass this class and exam, can I take my certification and get a job anywhere?
See “Does this course certify or qualify me?” This will depend on your employer. Remember, it is their responsibility to see that you are trained and if there is ever an accident, it is they who will have to prove to OSHA that they trained you sufficiently. Because of this, while some smaller businesses may simply accept your certificate and a copy of your test, they will often require you to go through their own training program. This is their right to do so. It is their further responsibility to train you in accordance with the job, site, equipment, etc.
How long is the training good for?
The timeframe for how long training remains valid depends on the specific topic and OSHA training guidelines. Heavy machinery operators, for instance, need to recertify every three years, while other training courses may have different renewal periods. The expiration date for each training course will be printed on your certificate of completion for reference so you know when to take the training again.
Will I get a certificate?
Yes, upon successful completion of the course and exam, you will have immediate online access to your certificate of completion. You have the option to download the practical evaluations for your specific course. Although the practical evaluation is not required for you to earn online course completion credit, we strongly recommend completing it under the supervision of your employer to ensure your mastery of the safety training topics.
How many people can use this course? Can I play it for several employees at the same time?
Only one employee can take the course. There are many reasons for this, but most importantly, the course is designed to train one employee per OSHA regulations. Also, there is an online final exam at the end that will be linked to the trainee assigned. OSHA requires proof of training, and if multiple people were to sit in on that one course, they would not get credit for taking it.
Are SCORM/Tin Can options available for use on our own company LMS?
All our online courses are SCORM-compatible and can be easily uploaded to your company’s current SCORM-compliant LMS using our SCORM Cloud dispatch service. We do not offer direct SCORM file access to our courses. If you would like more information about how SCORM dispatch works and whether it would be a good fit for your business needs, please contact our sales team at (888) 360-8764.
Can I become a Hard Hat Training reseller?
We do have reseller options available. Visit Become a Hard Hat Safety Affiliate Partner to learn more.
How do I look up my certificate of completion?
So, you have already purchased a course from us, taken the online training, and passed the certification exam with flying colors. Now what?
Simply print a copy of your course completion certificate for your employer and keep a copy for your records. You can log in to your LMS account anytime to print your certificate after you have completed the training.
eLearning Login
Reviews
There are no reviews yet.