Description
What’s in the Maritime Cold Water Survival Course in Spanish?
Our Cold Water Survival training course is OSHA Aligned, and our online version fulfills classroom training requirement. This course contains sections on Cold Water Immersion, Safety Equipment, and Survival Techniques. This training briefly presents the hazards of exposure to cold water that may endanger life, and provides advice based on the latest medical and scientific opinion on how to prevent or minimize those dangers. Knowing what is likely to happen if you are immersed in cold water is a survival aid in itself.
The presentation includes intermittent practice quiz questions to prepare for the final written exam included with the course. In addition to the written exam, this course also includes a checklist for employers to use when administering a practical exam.
Estimated Training Length: Because everyone learns and progresses at different speeds, the amount of time you spend taking this training will vary. However, the estimated time for this training is 30 – 60 min.
Intended Audience:
OSHA Requirements: This course meets the following OSHA Requirements:
- 29 CFR 1926.106 – Working on or Near Water
- 33 CFR 149.338 – Immersion Suit Requirements
- 46 CFR 199.273 – Immersion Suits
- 46 CFR 160.064 & 160.076 – Inherently Buoyant & Inflatable PFDs
- 46 CFR 28.265 – Emergency Instructions
- 46 CFR 28.270 – Instructions, Drills, and Safety Orientation
- 46 CFR 28.105 – PFDs & Immersion Suits: General Requirements
- 46 CFR 25.25 – Life Preservers & Other Lifesaving Equipment
How does this Online Cold Water Training Course Work?
1. First, you will complete the online cold water training course (est time: 30 – 60 min) which includes two modules:
- Module 1: Intro, Immersion & Equipment
- Module 2: Equipment, Survival Techniques & Conclusion
2. After that, you will take the online exam. In the event that you do not pass the exam the first time, you do get a second chance.
3. Immediately upon passing the exam, you will have instant access to your printable certificate and wallet card.
*Note the expiration date of your cold water survival certification and return to this page before then to purchase again.
The Best Train the Trainer Program in Spanish—Maritime Cold Water Survival Course
What is train the trainer? Simply put, a trainer takes the online course to become more familiar with the topic and learn how to teach the required topics. This offers a thorough, cost-effective way for trainers and employers to increase their knowledge and more effectively train and/or certify their crew. Our Train the Trainer courses are designed for companies with employees who have experience with the subject matter, but simply need or want a third-party trainer certificate.
Once you have completed the Trainer Certificate course and passed the exam, you will have immediate electronic access to our DIY training kit, which gives you everything you need to conduct training classes on as often as needed. These materials are reusable and customizable. We have fine-tuned our kits to provide you with the best training experience possible. They include accident profiles, videos, and other tools to help learners retain information and apply it on the job site, preventing tragic accidents or costly fines.
Train the Trainer Course Contents: Of course, every training kit is a little different. But, generally speaking, they consist of (but are not limited to) the following materials:
- Pertinent standards and regulations
- The customizable PowerPoint presentation
- A quick-reference guide for learners
- Written exams with answer keys
- Practical evaluation checklist
- Pre-shift inspection booklets
- Classroom forms for proper recordkeeping
- Full-sized certificates and wallet card templates for learners
Do take note that, while the online “trainer” portion of this course never expires, standards dictate that safety certification be completed at least once every three years (unless otherwise stated). These courses will combine with your onsite practical training to fulfill regulation's requirements for up to three years.
Remember, safety training is an investment. We’ve been providing industry-specific safety training solutions for individuals, safety managers, and business owners for over 15 years. That is why hundreds of companies and individuals all over the world trust the Hard Hat Training Series for their online training needs.
Online Maritime Cold Water Survival Train the Trainer Certification in Spanish
Becoming a trainer is ultimately an employer designation. For those who are becoming trainers on their own, you simply have to be able to justify why you are competent enough to be a trainer. Regulating organizations typically want you to have experience and training. While we travel the country certifying trainers, the online training course is an easy and cost-effective way to help employers make the designation by offering the required training.
We send our trainers all over the country training both operators and trainers. And even though regulations don’t require an Train the Trainer Certification (they are more interested in what topics are being trained on), many companies and individuals feel more comfortable going through the trainer program from a well-established, industry-recognized training company like us. But it doesn’t always make sense financially for companies. That is why we’ve created the option to get certified online. If you are comfortable training and comfortable with the equipment, you can simply purchase the online trainer course, get your certificate and training kit, and start training. It is a very cost-effective way to go.
Becoming a trainer is ultimately an employer designation. For those who are becoming trainers on their own, you simply have to be able to justify why you are competent enough to be a trainer. For OSHA’s part, they typically want you to have experience and training. While we travel the country certifying trainers, the online training course is an easy and cost-effective way to help employers make the designation by offering the required training.
How does a Train the Trainer course work?
1. Take the online trainer course at your own pace (3 hours total is typical).
Quiz questions along the way prepare you for the final exam.
2. Instant access to your safety certification, wallet card, and training kit materials (to use when training others) is granted once the online trainer course is completed and the subsequent online exam passed.
3. Congratulations! You've earned your lifetime trainer certificate and may train your workers whenever you need.
Additional Information
Other Training Options:
We offer two other types of training for this course. The other training types are online training and DIY training kits. An identical final exam and OSHA-aligned safety training certificate applies, no matter which of the three format options you choose below.
Online Training
Our online trainings are great for those who want to learn at their own pace and on their own time. Online trainings can be completed from any location, eliminating the need for expensive seminars.
Employers can assign employees specific trainings and
keep track of their progress and exam scores. We also offer
group trainings,
company accounts, and even
bulk discounts
for businesses.
View Online Training
Training Kit
Our kits are the perfect resource for those who want the freedom of training employees themselves. Unlike traditional trainings that are taken once, the kit offers a complete initial training as well as activities and materials to train employees long after they’ve been certified.
These materials include practical evaluations, exams, toolbox trainings, accident profiles, ect.
View DIY Training Kit
Currently Viewing: Train the Trainer
Train-the-trainer courses allow employers to take full control of the training process. Employees who take these courses are fully certified to use the training kit and train others.
This means that employers can hold training seminars and courses without the need for third-party trainers. We will also include a training presentation and materials to train others.
This is the current option
USA Aligned
Our Hard Hat Training training kit materials give you everything you need to be regulation aligned. We’ve spent years fine tuning these to make sure they contain the latest requirements, safety regulations, and hazards that come with operating equipment.
Our courses are written and regularly audited to meet the applicable OSHA, EECO, HHS, STC, MSHA and more standards.To learn what standards this course meets, see the course description tab. We list all applicable standards in the standards section.
Train the trainer courses certify an employee to train others. The TTT course comes with all of the materials the trainer would need to teach their own certification course. Our training kits are completely customizable, you can add, edit or remove anything in the training program to make it fit any international safety training standards that you are needing. It only takes minutes to get the training materials ready to use.
Managers: Take complete control of your safety training by requesting your custom branch now! We will respond within one business day. Need it now? Call us at (888) 360-8764 for immediate assistance. We are open on Monday through Friday, 8 AM (CST) to 8 PM (CST).
Online Safety Training FAQs
What does each online class cover?
Generally speaking, each course covers an overview of the topic, detailed explanation of relevant equipment, safe operating practices, common hazards to avoid, and hazard control measures.
How long is the course?
Trainees go at their own pace, but in general each class (including the exam) takes anywhere from 2 to 2.5 hours. We recommend planning for two or more so you don’t end up rushing through the exam.
Are these courses OSHA-aligned?
All Hard Hat Training online courses were designed to adhere to OSHA and ANSI training requirements. But it is important to understand that by OSHA-aligned, we mean it follows best practices and safety principles put forth by OSHA. In an online format, it is not possible to cover every code for every situation or hazard across every industry. For this reason, our safety training solutions are tools to further knowledge and help employers train and/or certify their crew.
However, just because a course or program is OSHA-aligned does not necessarily mean a company will be aligned or avoid citations if OSHA were to audit them. There is much more that goes into collective company alignment with OSHA. For example, workers need to be observed applying what they learned in the classroom in the field. This observation/practical exam should be done by trainers, supervisors, or other designated competent persons. Whether you use our training kits or online courses, we provide guides to help employers do this.
Other steps for ultimate alignment may include but are not limited to addressing with your crew any gaps in the training or additional hazards specific to your work situation; creating, training on, and enforcing written safety programs (also known as plans or procedures); and performing regular inspections and risk assessments.
Are the e-learning classes up-to-date with OSHA standards?
Yes, Hard Hat Training online courses incorporate the latest OSHA standards. As standards change, we make changes to the courses.
Does this course certify or qualify me?
There is a lot of confusion among operators and even companies about what it means to be certified or qualified. Simply put, no, a course does not certify anyone. It is the employer’s responsibility to make sure an employee is properly trained, and it is also his or her responsibility to say when the employee is “qualified” or “competent.” Our online courses and training kits are just a tool to help them in doing so.
According to OSHA, proper training must include a classroom portion, including a written exam, as well as a practical hands-on portion/exam wherein the operator is observed operating the machine. Our courses provide the classroom portion of the training. The safety administrator of the company will have access to a checklist which can be used to observe the trainee on the machine. When done successfully, the administrator signs the bottom of the form. At this point, unless further training is required by your employer, you have done everything required by OSHA to be considered by your employer as “qualified” or “competent.”
If I pass this class and exam, can I take my certification and get a job anywhere?
See “Does this course certify or qualify me?” This will depend on your employer. Remember, it is their responsibility to see that you are trained and if there is ever an accident, it is they who will have to prove to OSHA that they trained you sufficiently. Because of this, while some smaller businesses may simply accept your certificate and a copy of your test, they will often require you to go through their own training program. This is their right to do so. It is their further responsibility to train you in accordance with the job, site, equipment, etc.
How long is the training good for?
The timeframe for how long training remains valid depends on the specific topic and OSHA training guidelines. Heavy machinery operators, for instance, need to recertify every three years, while other training courses may have different renewal periods. The expiration date for each training course will be printed on your certificate of completion for reference so you know when to take the training again.
Will I get a certificate?
Yes, upon successful completion of the course and exam, you will have immediate online access to your certificate of completion. You have the option to download the practical evaluations for your specific course. Although the practical evaluation is not required for you to earn online course completion credit, we strongly recommend completing it under the supervision of your employer to ensure your mastery of the safety training topics.
How many people can use this course? Can I play it for several employees at the same time?
Only one employee can take the course. There are many reasons for this, but most importantly, the course is designed to train one employee per OSHA regulations. Also, there is an online final exam at the end that will be linked to the trainee assigned. OSHA requires proof of training, and if multiple people were to sit in on that one course, they would not get credit for taking it.
Are SCORM/Tin Can options available for use on our own company LMS?
All our online courses are SCORM-compatible and can be easily uploaded to your company’s current SCORM-compliant LMS using our SCORM Cloud dispatch service. We do not offer direct SCORM file access to our courses. If you would like more information about how SCORM dispatch works and whether it would be a good fit for your business needs, please contact our sales team at (888) 360-8764.
Can I become a Hard Hat Training reseller?
We do have reseller options available. Visit Become a Hard Hat Safety Affiliate Partner to learn more.
How do I look up my certificate of completion?
So, you have already purchased a course from us, taken the online training, and passed the certification exam with flying colors. Now what?
Simply print a copy of your course completion certificate for your employer and keep a copy for your records. You can log in to your LMS account anytime to print your certificate after you have completed the training.
eLearning Login
Reviews
There are no reviews yet.