Overhead Crane Training – Canada

$425.00$450.00

Overhead training kit: Canada aligned. Reusable. Customizable.

SKU: K-0362 Categories: , , , ,

Description

Overhead Crane Training – Canada

Looking for a cost-effective and convenient way to offer for your employees or customers? Our training program (available on CD, USB Drive, or via Instant Download) provides simple instructions with all the tools necessary to train and certify your employees and make them regulation aligned. Learn more about what comes with the kit.


Good for overhead cranes, chain hoists, bridge cranes, jib cranes, mobile gantry cranes. Our Overhead Crane safety training course is OSHA Aligned, and our online version fulfills OSHA?s classroom training requirement. This presentation includes intermittent practice quiz questions to prepare for the final written exam included with the course. In addition to the written exam, this course also includes a checklist for employers to use when administering a practical exam as required by OSHA.

Estimated Training Length: Because everyone learns and progresses at different speeds, the amount of time you spend taking this training will vary. However, the estimated time for this training is 1.5 – 2 hours.

Intended Audience:

  • Overhead Crane Operators
  • Supervisors
  • Managers
  • Employers

Course Goals:

  • Understand the importance of a pre-shift inspection and how to perform one
  • Recognize the common hazards associated with overhead cranes and how to avoid or mitigate them
  • Learn how to operate safely in a variety of on-site situations

Canada Standards: This course meets the following Canada standards:

  • CAN/CSA-B167-08 – Overhead traveling Cranes
  • CAN/CSA-C22.2 – Safety Code for Material Hoists
  • ISO 16715:2014 – Hand Signals used with Cranes
  • ASME/ANSI B30.1-29 – Cranes, Slings, Below the Hook Lifting Devices
  • ASME/ANSI B30.2 – Overhead and Gantry Cranes
  • ASME B30.11 – Monorails and Under-hung Cranes
  • ASME B30.16 – Overhead Hoists
  • SME B30.17 Overhead and Gantry Cranes

Not quite what you need? We also offer an online overhead crane
 


 

What’s in the Overhead Crane Training Kit?

At Hard Hat Training, our DIY Kits are meticulously crafted to ensure you deliver top-notch safety toolbox talks to your employees. All kits are built and updated by our experts using the most recent standards and guidelines, so you can be assured you are using the best practices and latest safety principles put in place by regulatory bodies. We have fine-tuned our kits to provide you with the best experience possible. They include accident profiles, videos, and other tools to help learners retain information and apply it on the job site, preventing tragic accidents or costly fines.

What You Get With Our DIY Safety Training Kit

Each safety training kit differs slightly. But, generally speaking, they consist of (but are not limited to) the following materials:

  • Pertinent standards and regulations
  • Safety PowerPoint Presentation (PPT)
  • A quick-reference guide
  • Written exams with answer keys
  • Practical evaluation checklists
  • Pre-shift inspection booklets
  • Classroom forms for proper recordkeeping
  • Full-sized certificates and wallet card templates 

Safety training isn't just a requirement—it's an essential investment in your workforce. At Hard Hat Training, we pride ourselves on delivering tailored safety training solutions that meet industry-specific needs. With over 15 years of dedicated experience, safety managers, business owners, and individual professionals across the globe rely on our trusted online training programs. Elevate your safety standards—choose Hard Hat Training.

Program Features

Why DIY Training kits might be right for you & work company

  • Unlimited Use (and Re-use): Your program (and all printable course materials) can be used again and again for no extra cost!
  • Personal Branding: You are now the authority with CDs and PPT presentations that you can brand personally.
  • Complete Customizability: Need to edit information for your specific industry or job site? You have TOTAL freedom to customize our training to meet your needs.
  • Professional-Grade: You'll receive the exact same training materials we use for our own on-site programs.
  • Industry-Leading Value: Our safety training program is the most thorough you will find, and at a price that meets your budget.
  • Accessibility: Materials can be downloaded for immediate use (save them on your computer or flash drive, or burn them to a CD).
  • Up-to-Date Information: All of our programs are updated to reflect the latest industry regulations.
  • Total Convenience: All of the Hard Hat Training programs are straightforward and easy to present and understand.

Implementation: Simply use the materials in the PPT (PowerPoint Presentation) from the Training Kit to:

  1. Conduct the training.
  2. Administer the exam.
  3. Issue certificates immediately to those who passed.

Still have questions? Visit our Safety Training Kit FAQs page.

Why You Need Overhead Crane Training:

While a license is not required in the U.S., certification is. Our training and the included exam will get you certified today.

Canada Aligned

At Hard Hat Training, we write all of our Canadian courses in accordance with the Canada Labour Code. Because occupational safety standards can vary significantly by province, however, our courses do not always accommodate provincial standards. That said, this course teaches all of the common safety principles that employees need to know in order to comply with these standards. In addition to the content of this course, employers must make sure to provide their employees with any further information they will need based on their industry and location.

Our training materials have been used by hundreds of companies to certify thousands of employees. If you have any questions about training and certifying employees in Canada, feel free to reach out to us by phone or email.

Other Training Options:

We offer two other types of training for this course. The other training types are online training and a train the trainer certification course. An identical final exam and OSHA-aligned safety training certificate applies, no matter which of the three format options you choose below.


online safety training

Online Training

Our online trainings are great for those who want to learn at their own pace and on their own time. Online trainings can be completed from any location, eliminating the need for expensive seminars.

Employers can assign employees specific trainings and keep track of their progress and exam scores. We also offer group trainings, company accounts, and even bulk discounts for businesses.

View Online Training
train the trainer safety training

Currently Viewing: Training Kit

Our kits are the perfect resource for those who want the freedom of training employees themselves. Unlike traditional trainings that are taken once, the kit offers a complete initial training as well as activities and materials to train employees long after they’ve been certified.

These materials include practical evaluations, exams, toolbox trainings, accident profiles, ect.

This is the current option

train the trainer safety training

Train the Trainer

Train-the-trainer courses allow employers to take full control of the training process. Employees who take these courses are fully certified to use the training kit and train others.

This means that employers can hold training seminars and courses without the need for third-party trainers. We will also include a training presentation and materials to train others.

View Train the Trainer

Online Safety Training FAQs

What does each online class cover?

Generally speaking, each course covers the following: 1. Overview of the Course/Introduction to the Equipment 2. Anatomy, including pre-shift inspections 3. Stability Principles 4. Common Hazards/Accident Profiles 5. Safe Operation 6. Rigging and Hand Signals (for crane courses only).

How long is the course?

Trainees go at their own pace, but in general each class (including the exam) takes anywhere from 2 to 2.5 hours. We recommend planning for two or more so you don’t end up rushing through the exam.

Are these courses OSHA-aligned?

All of our Hard Hat Training online courses were built and continue to be updated by our trainers and inspectors using OSHA and ANSI guidelines. But it is important to understand that by OSHA-aligned, we mean it follows to the best of our ability the best practices and safety principles put forth by OSHA. In an online format, it is not possible to cover every code for every situation or hazard across every industry. For this reason, our safety training solutions are tools to further knowledge and help employers train and/or certify their crew. But just because a course or program is OSHA-aligned it does not necessarily mean a company as a whole will be aligned or avoid citation if OSHA were to audit them. There is so much more that goes into collective company alignment with OSHA. For example, workers need to be observed applying in the field what they learned in the classroom. This observation/practical exam should be done by trainers, supervisors, or other designated competent persons. Whether you use our training kits or online courses, we provide guides to help employers do this. Other things that need to be done for ultimate alignment may include but are not limited to: addressing with your crew any gaps in the training or additional hazards or principles specific to your work situation; creating, training on, and enforcing and abiding by written safety programs (also known as plans or procedures); and performing regular inspections and risk assessments.

Are the e-learning classes up-to-date with OSHA standards?

Yes, all of our Hard Hat Training online courses are up-to-date with the latest OSHA standards. As standards change, we make changes to the courses. If you purchase any of our online courses outright, though, it will then be your responsibility to update the course in accordance with any changes to the standard.

Does this course certify or qualify me?

There is a lot of confusion among operators and even companies about what it means to be certified or qualified. Simply put, no, a course does not certify anyone, only an employer does. Or, in other words, because it is the employer’s responsibility to make sure an employee is properly trained, it is also his or her responsibility to say when the employee is “certified,” “qualified,” or “competent.” The online courses, like our training kits on CD or USB Drive or even live training via a 3rd party, is just a tool to help them in doing so.

According to OSHA, all operators of heavy equipment must receive operator training. Proper training must include a classroom portion including a written exam, as well as a practical hands-on portion/exam wherein the operator is observed operating the machine. The online course satisfies the required classroom portion of the training. Upon completion of the course and written exam, the safety administrator of the company will receive a checklist which can be used to observe the trainee on the machine. When done successfully, the administrator signs the bottom of the form. At this point, unless further training is required by your employer, you have done everything required by OSHA to be considered by your employer as “certified,” “qualified,” or “competent.”

If I pass this class and exam can I take my certification and get a job anywhere?

See “Does this course certify me?” This will depend on your employer. Remember, it is their responsibility to see that you are trained and if there is ever an accident, it is they who will have to prove to OSHA that they trained you sufficiently. Because of this, while some smaller businesses may simply accept your certificate and a copy of your test, more often than not they will require you to go through their own training program. This is their right to do so. It is their further responsibility to train you in accordance with the job, site, equipment, etc. Having said that, we have fielded many calls from potential employers who wanted to learn more about the classroom portion of the training we offered. After hearing our explanation, they accepted the online class as satisfying the classroom portion of the required training and proceeded to do their own practical.

How long is the training good for?

OSHA standards dictate that safety certification needs to be completed at least once every three years. Since no online course can provide “certification,” these courses will combine with your onsite practical training to fulfill OSHA’s requirements for up to three years. Having said that, refresher training is required sooner if an employee changes sites or jobs, is asked to operate a different type of the equipment, is involved in a near-miss or accident, or is observed operating the machine in a dangerous manner.

Will I get a certificate?

Yes, upon successful completion of the course and exam, you will have immediate electronic access to your test, a certificate, and a checklist you can use for the practical hands-on portion of the training. Simply print them off.

How many people can use this course? Can I play it for several employees at the same time?

When a course is assigned to an employee, only that employee can take the course. There are many reasons for this, but most importantly the course is designed to train that one employee per OSHA regulations. Also, there is a final written exam at the end that will be linked to the trainee assigned. OSHA requires proof of training and if multiple people were to sit in on that one course, they would not get credit for taking it.

Can I customize the classes?

Your business’s learning portal can be completely customized for your employees including colors and logo. Additionally, if you purchase our courses outright to be used on your own company LMS (learning management system), you also get the right to rebuild them and customize them to meet your own needs. If you have Adobe Captivate, which we use to build our courses, customization is even easier.

Are SCORM/Tin Can options available for use on our own company LMS?

All of our online courses are designed to be SCORM-compatible and can be easily uploaded to your company’s current SCORM-friendly LMS. You can license their use annually or purchase them outright. Licensing or purchasing them outright does not, however, give you the right to resell or distribute our courses to parties other than those whom you are training.

If we buy or license the eLearning courses for use on our own LMS, can you customize them for us?

Yes, we have done and continue to do this for clients. Pricing depends on the extent of customization requested. Please contact us for a quote.

Can I resell these trainings?

We do have resale options available. Contact us regarding resale opportunities.

How do I Look Up My OSHA Alignment Safety Certification?

So, you have already purchased a course from us, taken the online training, and passed the certifaction exam with flying colors. Now what? Most people want to print off a copy of thier OSHA Alignment Safety Certification and keep it for your records. Learn how to do that.

Reviews

There are no reviews yet.

Be the first to review “Overhead Crane Training – Canada”

Your email address will not be published. Required fields are marked *

More Information

 
train the trainer icon

Train a Trainer

Along with a presentation PPT kit, you will recive an online training course that will certifiy your trainer to train others--only $250 more.

TTT COURSES
online safety training

Print Details

Want to print training course information and show it to others? See our informational, printable PDF document and print ourself a copy.

View Document
demo out train the trainer certifcation

Demo Course

If further information is needed, companies can request to demo the training course. Call (888) 360-8764 to request this service.

(888) 360-8764

How Does the Training Kit Work?

Have an employee use the kit’s main PowerPoint presentation to instruct the trainees. (any person you, the employer, deems competent may conduct this). Distribute the written exam to each trainee individually. Gather the completed exams and use the included answer key to grade them.

We use a passing grade of 80% as a guideline, but as the employer you are free to adjust it however you like. Administer the practical exam to each trainee. (We suggest correcting any mistakes and having the trainee initial the edit on the practical exam sheet.) Use the included template to print certificates and wallet cards for those who passed. Note the expiration date and be sure to re-train and re-certify before then.

PURCHASE COURSE

You may also like…