Description
What’s in the Telehandler Course?
Our telehandler safety training course is OSHA Aligned, and our online version fulfills OSHA’s classroom training requirement. This presentation includes intermittent practice quiz questions to prepare for the final written exam included with the course. In addition to the written exam, this course also includes a checklist for employers to use when administering a practical exam as required by OSHA.
Training Scope: Each class contains the following information:
- Anatomy & Pre-shift Inspections
- Safe Operations & Stability
- Know your Machine
- Attachments
- Ergonomics
- Load Charts
- Know your Worksite
- Traveling
- Load Handling
- Communication
- Investigated Case Studies
Estimated Training Length: Because everyone learns and progresses at different speeds, the amount of time you spend taking this training will vary. However, the estimated time for this training is 2.5 – 3 hours.
Intended Audience:
- Employees
- Supervisors
- Managers
- Employers
Course Goals:
- Understand the importance of a pre-shift inspection and how to perform one
- Recognize the common hazards associated with telehandlers and how to avoid or mitigate them
- Learn how to operate safely in a variety of on-site situations
OSHA Requirements: This course meets the following OSHA Requirements:
- OSHA 29 CFR 1910.178 – Powered Industrial Trucks
- OSHA 29 CFR 1910.178 APP A
- OSHA 29 CFR 1926.451, 452, 454 – Applicable Scaffolding Standard
- OSHA 29 CFR 1926.602(c)(2)(v) – Scaffold Platforms
- ANSI/ITSDF B56.1 – Low Lift and High Lift Trucks
- ANSI/ITSDF B56.6 – Rough Terrain Forklift Lift Trucks
- ANSI/ITSDF B56.6-2005 (5.15, 5.16, 8.24)
- ANSI A92.5-2006 – Boom Supported Elevating Work Platforms
Why Take Our Telescopic Handler Training/Telehandler Training Online – Class VII?
Also called Zoom Boom, Rough Terrain Forklift, and Reach Forklift
Our online training course provides a substantial, thorough, and effective way to learn how to work safely. We’ve been providing industry-specific safety training solutions for individuals, safety managers, and business owners for over 15 years.
The online course meets the classroom requirement for occupational safety training. It also includes a proficiency checklist that employers can use to perform a practical evaluation, in accordance with standards and regulations.
We have fine-tuned this training to provide you with the best experience possible. Our robust training approach gives an interactive experience that helps learners retain information and apply it on the job site, preventing costly accidents and fines. Safety training is an investment. That is why hundreds of companies and individuals all over the world trust the Hard Hat Training Series for their online training needs.
Why Buy Our Online Telehandler Training?
- Complete Training: First and foremost our goal is to keep you safe and save you money. Don't risk getting expensive OSHA fines because you settled for a sub-par training program that didn't cover safety topics in depth. Train using a program that helps you retain what is learned so that it is put into practice on job sites.
- Cost-Effective: Hiring a trainer to come on-site can be expensive. In contrast, our online curriculum lowers costs while still providing a professional training experience.
- Records Tracking System: We offer an easy-to-use management system so that if you have multiple students who are receiving the training you can have access to all records, all-terrain certificates, observation guides and more! (contact us if you would like us to quickly create a company account for you)
- Train Your Way: You can use this online training program for new hire training, refresher training or train remotely. Access it from anywhere and work on your schedule.
- Interactive Learning: Special reminders and quiz questions throughout the course prep students for the final exam so that it is passed the first time.
- Corporate License: Do you want to host this course on your own server? Contact us about obtaining broadcasting rights for this and any of our other online courses.
Other Training Options:
We offer two other types of training for this course. The other training types are DIY training kits and a train the trainer certification course. An identical final exam and OSHA-aligned safety training certificate applies, no matter which of the three format options you choose below.
Currently Viewing: Online Training
Our online trainings are great for those who want to learn at their own pace and on their own time. Online trainings can be completed from any location, eliminating the need for expensive seminars.
Employers can assign employees specific trainings and
keep track of their progress and exam scores. We also offer
group trainings,
company accounts, and even
bulk discounts
for businesses.
This is the current option
Training Kit
Our kits are the perfect resource for those who want the freedom of training employees themselves. Unlike traditional trainings that are taken once, the kit offers a complete initial training as well as activities and materials to train employees long after they’ve been certified.
These materials include practical evaluations, exams, toolbox trainings, accident profiles, ect.
View DIY Training Kit
Train the Trainer
Train-the-trainer courses allow employers to take full control of the training process. Employees who take these courses are fully certified to use the training kit and train others.
This means that employers can hold training seminars and courses without the need for third-party trainers. We will also include a training presentation and materials to train others.
View Train the Trainer
Managers: Take complete control of your safety training by requesting your custom branch now! We will respond within one business day. Need it now? Call us at 1-888-438-8477 for immediate assistance. We are open o Monday through Friday, 8 AM (CST) to 8 PM (CST).
When you purchase (credits) you are essentially buying seats in a virtual classroom. You may assign any employee(s) to any class(es) at any time until those (seats) have all been assigned.
Whether you are looking to save on a few guys or your whole crew, we make it affordable for everyone to get safety training. These discounts are available on all of our online trainings! Look below to see the breakdown of what you can save when you buy your course seats (credits) in bulk with Safety Provisions.
Online Safety Training FAQs
What does each online class cover?
Generally speaking, each course covers the following: 1. Overview of the Course/Introduction to the Equipment 2. Anatomy, including pre-shift inspections 3. Stability Principles 4. Common Hazards/Accident Profiles 5. Safe Operation 6. Rigging and Hand Signals (for crane courses only).
How long is the course?
Trainees go at their own pace, but in general each class (including the exam) takes anywhere from 2 to 2.5 hours. We recommend planning for two or more so you don’t end up rushing through the exam.
Are these courses OSHA-aligned?
All of our Hard Hat Training online courses were built and continue to be updated by our trainers and inspectors using OSHA and ANSI guidelines. But it is important to understand that by OSHA-aligned, we mean it follows to the best of our ability the best practices and safety principles put forth by OSHA. In an online format, it is not possible to cover every code for every situation or hazard across every industry. For this reason, our safety training solutions are tools to further knowledge and help employers train and/or certify their crew. But just because a course or program is OSHA-aligned it does not necessarily mean a company as a whole will be aligned or avoid citation if OSHA were to audit them. There is so much more that goes into collective company alignment with OSHA. For example, workers need to be observed applying in the field what they learned in the classroom. This observation/practical exam should be done by trainers, supervisors, or other designated competent persons. Whether you use our training kits or online courses, we provide guides to help employers do this. Other things that need to be done for ultimate alignment may include but are not limited to: addressing with your crew any gaps in the training or additional hazards or principles specific to your work situation; creating, training on, and enforcing and abiding by written safety programs (also known as plans or procedures); and performing regular inspections and risk assessments.
Are the e-learning classes up-to-date with OSHA standards?
Yes, all of our Hard Hat Training online courses are up-to-date with the latest OSHA standards. As standards change, we make changes to the courses. If you purchase any of our online courses outright, though, it will then be your responsibility to update the course in accordance with any changes to the standard.
Does this course certify or qualify me?
There is a lot of confusion among operators and even companies about what it means to be certified or qualified. Simply put, no, a course does not certify anyone, only an employer does. Or, in other words, because it is the employer’s responsibility to make sure an employee is properly trained, it is also his or her responsibility to say when the employee is “certified,” “qualified,” or “competent.” The online courses, like our training kits on CD or USB Drive or even live training via a 3rd party, is just a tool to help them in doing so.
According to OSHA, all operators of heavy equipment must receive operator training. Proper training must include a classroom portion including a written exam, as well as a practical hands-on portion/exam wherein the operator is observed operating the machine. The online course satisfies the required classroom portion of the training. Upon completion of the course and written exam, the safety administrator of the company will receive a checklist which can be used to observe the trainee on the machine. When done successfully, the administrator signs the bottom of the form. At this point, unless further training is required by your employer, you have done everything required by OSHA to be considered by your employer as “certified,” “qualified,” or “competent.”
If I pass this class and exam can I take my certification and get a job anywhere?
See “Does this course certify me?” This will depend on your employer. Remember, it is their responsibility to see that you are trained and if there is ever an accident, it is they who will have to prove to OSHA that they trained you sufficiently. Because of this, while some smaller businesses may simply accept your certificate and a copy of your test, more often than not they will require you to go through their own training program. This is their right to do so. It is their further responsibility to train you in accordance with the job, site, equipment, etc. Having said that, we have fielded many calls from potential employers who wanted to learn more about the classroom portion of the training we offered. After hearing our explanation, they accepted the online class as satisfying the classroom portion of the required training and proceeded to do their own practical.
How long is the training good for?
OSHA standards dictate that safety certification needs to be completed at least once every three years. Since no online course can provide “certification,” these courses will combine with your onsite practical training to fulfill OSHA’s requirements for up to three years. Having said that, refresher training is required sooner if an employee changes sites or jobs, is asked to operate a different type of the equipment, is involved in a near-miss or accident, or is observed operating the machine in a dangerous manner.
Will I get a certificate?
Yes, upon successful completion of the course and exam, you will have immediate electronic access to your test, a certificate, and a checklist you can use for the practical hands-on portion of the training. Simply print them off.
How many people can use this course? Can I play it for several employees at the same time?
When a course is assigned to an employee, only that employee can take the course. There are many reasons for this, but most importantly the course is designed to train that one employee per OSHA regulations. Also, there is a final written exam at the end that will be linked to the trainee assigned. OSHA requires proof of training and if multiple people were to sit in on that one course, they would not get credit for taking it.
Can I customize the classes?
Your business’s learning portal can be completely customized for your employees including colors and logo. Additionally, if you purchase our courses outright to be used on your own company LMS (learning management system), you also get the right to rebuild them and customize them to meet your own needs. If you have Adobe Captivate, which we use to build our courses, customization is even easier.
Are SCORM/Tin Can options available for use on our own company LMS?
All of our online courses are designed to be SCORM-compatible and can be easily uploaded to your company’s current SCORM-friendly LMS. You can license their use annually or purchase them outright. Licensing or purchasing them outright does not, however, give you the right to resell or distribute our courses to parties other than those whom you are training.
If we buy or license the eLearning courses for use on our own LMS, can you customize them for us?
Yes, we have done and continue to do this for clients. Pricing depends on the extent of customization requested. Please contact us for a quote.
Can I resell these trainings?
We do have resale options available. Contact us regarding resale opportunities.
How do I Look Up My OSHA Alignment Safety Certification?
So, you have already purchased a course from us, taken the online training, and passed the certifaction exam with flying colors. Now what? Most people want to print off a copy of thier OSHA Alignment Safety Certification and keep it for your records. Learn how to do that.
Karl W. –
lots of info
Hard Hat Training –
Thank you, Karl. We’re glad that the course was able to provide you with a lot of information.
Jordan –
Good Information
Hard Hat Training –
Thank you for taking the time to review the course, Jordan. We’re glad it was informative for you.
Peter H. –
No suggestions. Good course
Hard Hat Training –
Thanks, Peter. We appreciate your comments. We are so happy that you found the course so good.
Seth S. –
good training, but could you maybe take away the time to wait to get to the next question
Hard Hat Training –
Thanks for your review, Seth. With the training that we provide, we want to ensure that all those that take our course actually take the time to learn the material. It would be a shame to allow people to skip through the slides, take the exam, and certify themselves without learning the material. The timing mechanism will remain for that reason. Thank you, though, for your feedback.
Julio G. –
lots of good information for beginners but you could maybe get a better narrator
Hard Hat Training –
Thanks for taking the time to rate the course, Julio. We’re glad that the information was good for you. We appreciate the feedback on the narrator, and we can certainly look into that.
Wilmer C. –
this a great learning tool and shows how well you know your machine
Hard Hat Training –
Thank you, Wilmer, for the incredible review! We are thrilled that the course was so beneficial for you and that you were able to gain some further knowledge about the Telehandler through it.
Hector F. –
good training but take away the time to wait to get to the next question
Hard Hat Training –
Thanks for your feedback, Hector. We have the time there to ensure that people are paying attention to the information before moving on. It would be a shame if someone simply clicked through the course without learning anything. Nevertheless, we appreciate you taking the time to voice your thoughts to us. Thank you!
Ulises T. –
easy and gets you certified
Hard Hat Training –
Thanks, Ulises! We are so glad that you found the course easy to get through and that you were able to receive your certification. Please let us know if we can help with any of your other training needs.
Grant M. –
thorough, it was great!
Hard Hat Training –
Thank you so much, Grant! We are so happy that you found the course thorough.
Sam E. –
Vary knowledgeable.
Hard Hat Training –
Hello Sam,
We are glad you liked the training! Thank you for taking the time to leave us a review. Please let us not if we can help you with any other training in the future! And thanks for choosing Hard Hat Training.
Ulises H. –
Felt easier to accomplish at my own pace but maybe make it shorter and more to the point.
Hard Hat Training –
Hello Ulises,
Thank you for your feedback, we are continually trying to update and improve our courses as well as our service to give users the most relevant information and the best experience. Thank you for taking the time to leave us a review and for choosing Hard Hat Training!
Jacob H. –
Easy and thorough
Hard Hat Training –
Hello Jacob,
We are glad you liked the training! Thank you for taking the time to leave us a review. Please let us not if we can help you with any other training in the future! And thanks for choosing Hard Hat Training.
Frank G. –
It helpful in many ways
Hard Hat Training –
Thank you so much, Frank, for your wonderful review! We appreciate you taking the time to let us know that you found the course so helpful.
Beth R. –
Very thorough
Hard Hat Training –
Thanks, Beth. We appreciate the rating that you gave this course. If we can help you with any other training needs, please let us know.
Hank W. –
it’s informative
Hard Hat Training –
Thanks for your feedback, Hank. We noticed you rated the course 3 stars, so if you think that there is anything that can improve, please let us know. We are always looking to improve.
James T. –
Very Beneficial, good information
Hard Hat Training –
Thanks, James! We appreciate what you have said. We’re glad that you found this course so beneficial and full of good information. That’s what we are aiming for!
Asa B. –
Very interesting and informative
Hard Hat Training –
Thank you, Asa, for letting us know how the course was for you. It’s hard to go through this type of training while being invested in it. We’re glad that you found it interesting and informative.
Trent J. –
Easy to understand and learn
Hard Hat Training –
Thanks, Trent, for the awesome review! We’re glad the course was easy to follow along with and that you were able to learn from it.
Henry W. –
easy to understand
Hard Hat Training –
Thanks, Henry. We’re glad the course was understandable.
Walter D. –
it was very understandeble, it was perfect
Hard Hat Training –
Hello Walter,
We are glad you liked the training! Thank you for taking the time to leave us a review. Please let us know if we can help you with any other training in the future! And thanks for choosing Hard Hat Training.
Jayson N. –
It’s user-friendly. Suggestion – Have it save your spot properly,
Hard Hat Training –
Hello Jayson,
We are glad you liked the training! Thank you for taking the time to leave us a review and giving us some helpful feedback. We will definitely take your suggestion into consideration. Please let us know if we can help you with any other training in the future! And thanks for choosing Hard Hat Training.
Asa R. –
convenient
Hard Hat Training –
Thank you, Asa. We’re happy to know that the course was convenient for you. If we can help with any of your other training needs, please let us know.
Cooper D. –
easy to understand straight of forward
Hard Hat Training (verified owner) –
Thank you so much Cooper! We try to keep our trainings informative as well as interactive. We are glad to know that you have found this to be the case. Thank you again!